Monkeys R32 - Page 3

Topic: Monkeys R32 (Read 7070 times) previous topic - next topic

Re: Monkeys R32

Reply #30 – November 06, 2020, 08:22:01 AM

It helps I've got a VERY understanding wife, who I may have built a couple of cars for in the past

In all honesty though, he really has changed my world. This is the first big thing I've tackled since the boy came along, my other updates have all been the result of 10 mins here and there. The inlet manifold, I was stopping in after work, putting a coat on, then leaving again every day for a week.

Re: Monkeys R32

Reply #31 – November 10, 2020, 01:05:08 PM

Now on Youtube!

https://youtu.be/Dg-KbVQO-GM

Re: Monkeys R32

Reply #32 – November 10, 2020, 01:47:32 PM

Great video, watched it as my lunchtime treat

Tim is getting some decent content on his channel.

Re: Monkeys R32

Reply #33 – November 10, 2020, 06:32:51 PM

Can I have your autograph

Re: Monkeys R32

Reply #34 – November 10, 2020, 09:03:12 PM

Quote from: Damien.wrl on November 10, 2020, 06:32:51 PM

Can I have your autograph

Pretty sure it's all about the selfie nowadays

Re: Monkeys R32

Reply #35 – November 10, 2020, 09:30:56 PM

Quote from: Monkey on November 10, 2020, 09:03:12 PM

Quote from: Damien.wrl on November 10, 2020, 06:32:51 PM
Can I have your autograph

Pretty sure it's all about the selfie nowadays

When I was young “selfies” made you go blind ....

Re: Monkeys R32

Reply #36 – January 21, 2021, 11:29:08 AM

They don't, I've tried!

Re: Monkeys R32

Reply #37 – January 21, 2021, 11:39:23 AM

So I bought a 3D printer for christmas and have been getting to grips with it.
My goal is to print some brake ducts to help cooling, but also anything else I need on the car, that I can print!

So started off small, I needed a couple of window switch blanks, but couldn't find any that weren't expensive!
Out came the CAD...

Untitled by Dave Ackerman, on Flickr

Untitled by Dave Ackerman, on Flickr

Took a bit of tweaking here and there

Untitled by Dave Ackerman, on Flickr
But finally got something that was near mm perfect

Untitled by Dave Ackerman, on Flickr

Really happy with the outcome

Untitled by Dave Ackerman, on Flickr

Re: Monkeys R32

Reply #38 – January 21, 2021, 11:42:40 AM

With the first success of the 3D printer, I thought I'd expand a little.
Found a design for a gauge holder on Thingiverse.
I want to go back to having a head unit at some point, so I fired up the printer again!

Untitled by Dave Ackerman, on Flickr

Untitled by Dave Ackerman, on Flickr
Not a bad result

Untitled by Dave Ackerman, on Flickr

Untitled by Dave Ackerman, on Flickr

It'll need a little fettling, but there's a good fitting kit behind it and I think it'll be good once fitted

Re: Monkeys R32

Reply #39 – January 21, 2021, 01:30:27 PM

Looks superb - 3D printing, specially now that it's reached the home use level is just amazing to me, I think it'll be the salvation of many a potential classic now that cars from the 80's have entered that category.

It's inevitable that eventually most things that were previously unobtainable could be recreated. Peugeot have said they're going to use it to make their factory approved restorations possible, says it all about where things are going.

Hope home metal printing develops in the same way, imagine what that'll be like?

Re: Monkeys R32

Reply #40 – January 22, 2021, 08:25:17 AM

Must admit, I had no idea they'd dropped in price so much, I used to think they were at least £1400, but you can pick them up for less than £200 now!

I'd been curious about 3D printing for a while and had some Christmas money and went for it.
So glad I did as it's opened a world of opportunities, like you said, with the constant progress in this area, obsolescent parts could be a thing of the past!

I'd absolutely love to get my hands on a metal printer!

Re: Monkeys R32

Reply #41 – January 22, 2021, 08:55:05 AM

What is the model of your printer? Looks like a decent machine, been wondering to get one myself too :hmm:

Re: Monkeys R32

Reply #42 – January 22, 2021, 09:04:23 AM

It's a Creality Ender 5, I'm really happy with it.

Re: Monkeys R32

Reply #43 – November 15, 2021, 04:08:14 PM

Must admit, with all the attention I've been spending on the red one, this one has been forgotten about.
I've also forgotten to update the thread with bits I had done!

Either way, in the interest of continuity, I've done a few more things on the old girl.
Starting off with an update on how my crackle paint experiment turned out, quite happy with the results

Untitled by Dave Ackerman, on Flickr
You can see why I'm going to be putting a fresh slam panel on!

You can also see that the front end needs a bit of a tidy up in general, the headlights were milky and the grill was cracked!

Untitled by Dave Ackerman, on Flickr

I bought some new Hella headlights, but couldn't find decent make spots new anywhere.

So I pulled them off the car, bought new clips and started the clean up...

Untitled by Dave Ackerman, on Flickr

Masked it up and sent it into the sand blaster

Untitled by Dave Ackerman, on Flickr

Primed

Untitled by Dave Ackerman, on Flickr

Painted

Untitled by Dave Ackerman, on Flickr

And re-assembled

Untitled by Dave Ackerman, on Flickr

Found a great condition grill and put it all back together.

Untitled by Dave Ackerman, on Flickr

I think that's about it for now

Re: Monkeys R32

Reply #44 – November 15, 2021, 10:39:59 PM

I had milky driving lights so whilst I had the grille off to paint the faded red trim I gave them a fettle.
I used a washing-up solution with a baby bottle brush. I was surprised a layer of dirt had made them milky...but no issue with the headllights or foglights. It was during a hot summer week so the light soon dried outdoors.

Re the aircon.
FYI Rubjonny is using a MK4 HVAC which means minor modding of the bulkhead. He is also planning on using MK4 piping which all goes down the drivers side inner wing and a MK4 dryer to maintain the same pipe fittings. Looks like that might work better in your engine bay?
My install is parked until the good weather returns. Hopefully I'll have stripped the aircon wires out of the MK3 engine loom and I'll get the custom pipes made-up and fitted.