Ignition issue June 01, 2020, 02:19:42 PM Recently i've had a situation when starting the GTi where the key turns too far in the ignition & doesnt click back into the 1st position, resulting in the starter motor continuing to run after the engine has actually started. It needs a manual turn back every time.Before i go buying parts, Is this likely to be a switch or barrel problem?Thanks in advance
Re: Ignition issue Reply #1 – June 01, 2020, 02:23:52 PM Quote from: jenkiam on June 01, 2020, 02:19:42 PMRecently i've had a situation when starting the GTi where the key turns too far in the ignition & doesnt click back into the 1st position, resulting in the starter motor continuing to run after the engine has actually started. It needs a manual turn back every time.Before i go buying parts, Is this likely to be a switch or barrel problem?Thanks in advanceIts a 92 8v btw
Re: Ignition issue Reply #2 – June 01, 2020, 09:58:07 PM I’d say barrel more likely than switch. Could try some maintenance spray into the barrel And see if that helps.Is it original, how worn lose is the key?
Re: Ignition issue Reply #3 – June 01, 2020, 10:52:28 PM I would say its the original judging by the key, which is pretty worn too.
Re: Ignition issue Reply #4 – July 16, 2021, 01:15:13 PM Hi I've had the same problem, how did you resolve it Jenkaim? did you buy a new ignition barrel?
Re: Ignition issue Reply #5 – July 16, 2021, 01:35:31 PM to be honest i sold the car shortly after, so i didnt ever fix it!
Re: Ignition issue Reply #6 – October 24, 2021, 07:49:30 AM If you remove the electrical switch from the back of the lock assembly does it still stick?
Topic: Ignition issue (Read 1145 times)
previous topic - next topic
