Skip to main content ↑ ↓
Topic: Correcting the camber settings with a camber tool (Read 1093 times) previous topic - next topic

Correcting the camber settings with a camber tool

So it has been a while since I last had the steering alignment corrected. I've bought some camber adjustment bolts and a camber alignment tool and thought I'd have a go myself.
The Haynes bible says the camber needs to be:
-35' +- 20' which seems to be a third to a fifth of a degree negative camber?

My camber level increments in degrees! Maybe I just use it to see how far out it is then take it to a garage!
1991 Tornado Red BB 8v GTI Moredoor
2008 Skoda Octy Scout aka dirty diesel

Re: Correcting the camber settings with a camber tool

Reply #1 –
My rule of thumb for a mk2 is -1.5
-1.75 if I'm feeling fruity.
Mk2 Driver
Mk2 Silver 8v
Corrado G60 Turbo
Mk2 Red 8v
Mk2 Grey 16v
Mk2 BBM ABF
Bora 20vt
Mk2 Green VR6
Mk2 Green ABF
Mk2 BBM 20vt
3.2 TT Roadster
Mk2 Red 16v
225 TT Coup
3.2 TT Coup
Mk4 Anniversary
Mk7 Red GTI Performance
Mk2 Red GTI Restoration
Mk2 BBM R32
911 Carrera 4S

Re: Correcting the camber settings with a camber tool

Reply #2 –
I'll have a play at the weekend. I can't make it much worse than it is now....famous last words!
1991 Tornado Red BB 8v GTI Moredoor
2008 Skoda Octy Scout aka dirty diesel
 

Re: Correcting the camber settings with a camber tool

Reply #3 –
Yeah -1.5 is what I set mine to, you can get that much with standard bolts, when assembling you push the shock hard in before torquing up the 2 bolts, it moves the hub negative, did this on mine when I fitted new shock springs and top mounts and took it for alignment and the camber was near enough -1.5 both sides.