Clutch not fitting over crankshaft end?!? August 10, 2021, 09:48:11 PM I have managed to get the pressure plate off which was a struggle. It was on so tight!Offered up the new clutch and its as though the clutch centre hole is too small for the crankshaft end. Is this normal? I thought it should just slot straight over with no issues and then bolt up.Has anyone else experienced this?I don't want to force the new one on.Cheers,Charlie
Re: Clutch not fitting over crankshaft end?!? Reply #1 – August 10, 2021, 10:29:32 PM I was sold a 16v gearbox by mistake once. Box wouldn’t marry to the clutch as the input shaft it larger. Have you got a 16v and 8v clutch kit?
Re: Clutch not fitting over crankshaft end?!? Reply #2 – August 11, 2021, 02:11:38 PM Hi Eddy, I have an 020 gearbox. I bought the following clutch as its the same as what was already in the car but thinking now the previous owner forced the pressure plate on as it was a PITA to get off!!https://www.heritagepartscentre.com/uk/027198141c-1-8-16v-gti-210mm-clutch-kit.html?qty=1Existing clutch;
Topic: Clutch not fitting over crankshaft end?!? (Read 508 times)
previous topic - next topic
