Skip to main content
Topic: steering U/J boot (Read 326 times) previous topic - next topic

steering U/J boot

Heys peeps,

my U/J boot is very bad needs replacing, i cant find any, anywhere. so does anyone here have the solution fot that,

or another model that will fit just as good ?

or has anyone fitted the LHD version, im tempted to get it anyway, i see no difference " but that could be due to stock pictures" i understand the postion is different so maybe the lower half is angled different,

Any info is greatfully recieved

Re: steering U/J boot

Reply #1
You wouldn't get away with the LHD one, it's basically a mirror image.
You didn't mention if you've got PAS or non PAS.
But Heritage have PAS boots in:
https://www.heritagepartscentre.com/uk/192419523f-boot-for-steering-rack-uj-right-hand-drive-with-power-steering.html
Mk2 Driver
Mk2 Silver 8v
Corrado G60 Turbo
Mk2 Red 8v
Mk2 Grey 16v
Mk2 BBM ABF
Bora 20vt
Mk2 Green VR6
Mk2 Green ABF
Mk2 BBM 20vt
3.2 TT Roadster
Mk2 Red 16v
225 TT Coup
3.2 TT Coup
Mk4 Anniversary
Mk7 Red GTI Performance
Mk2 Red GTI Restoration

Mk2 BBM R32
911 Carrera 4S

Re: steering U/J boot

Reply #2
Sadly have non power steering version

Have found lhd was so cheap, an no one anywhere responding. Ordered it, in hope it fits somewhat ok.

Found plenty of second hand ones that are rock hard but not cracked just yet. But they want silly money.

May just have to wait until heritage restock them

Re: steering U/J boot

Reply #3
Chances are VW Classic Parts will have them back in sooner...
https://www.classic-vw.co.uk/steering-knuckle-boot-rhd-non-power-steering-192419523e-mk2-golf-jetta-26559-p.asp
Mk2 Driver
Mk2 Silver 8v
Corrado G60 Turbo
Mk2 Red 8v
Mk2 Grey 16v
Mk2 BBM ABF
Bora 20vt
Mk2 Green VR6
Mk2 Green ABF
Mk2 BBM 20vt
3.2 TT Roadster
Mk2 Red 16v
225 TT Coup
3.2 TT Coup
Mk4 Anniversary
Mk7 Red GTI Performance
Mk2 Red GTI Restoration

Mk2 BBM R32
911 Carrera 4S

Re: steering U/J boot

Reply #4
The LHD one arrived today, i compared it with my split one, maybe not the greatest for me to compare with. But its all i got to go on, seemed no different still to me. Fited to bulk head fine with UJ going threw it, until subframe and rack get bolted in place, i dont see why theres going to be an issue looks correct to me so far

But well aware its going to bite still in the rear