Polybush Top Mounts

Topic: Polybush Top Mounts (Read 2198 times) previous topic - next topic

Re: Polybush Top Mounts

Reply #15 – November 18, 2020, 09:32:58 AM

don't happen to have the part number for the larger ones do you?

Re: Polybush Top Mounts

Reply #16 – November 19, 2020, 10:31:53 AM

I now know they have to be the 105mm ones, but the mind boggles at the shear amount of different ones available.

Re: Polybush Top Mounts

Reply #17 – November 20, 2020, 12:39:18 AM

Wind back to reply#11.
All the details are in the Club GTI post.
1H0412341 is the part number of the spring plates.

B&B on ebay probably sell the other stuff. Found their service to be gr8 with super speedy delivery.

There''s different opinions on whether the car sits higher at the front. Mine was slightly "nose-up" to begin with so I put my eibach springs back on the front. Not sure if I will keep it like that tho!

Re: Polybush Top Mounts

Reply #18 – November 20, 2020, 05:35:35 PM

Ok cheers, will go to VW and see what they have to say with that number

When you put it into Google, loads of different types appear,

Re: Polybush Top Mounts

Reply #19 – November 22, 2020, 08:16:05 PM

Yes me too. Put it in eBay and I'm sure they are more expensive than the VW dealers. I put "vr6 front spring top" and just seen these although it doesn't say the diameter which I think needs to be 110mm.

FK 10mm lower

Good luck.

Re: Polybush Top Mounts

Reply #20 – November 27, 2020, 05:28:52 PM

just saw this on facebook when someone was asking about confirmation of the correct set up, thought it might be helpful: